5005 H34 2mm~6mm Thickness 6mm-2500mm Aluminium Alloy Sheet For Antirust
Product Description
5005 aluminum alloy has medium strength and good corrosion resistance, 5005 aluminum alloy is used as conductor, cooker, instrument panel, Shell and building decoration. 5005 aluminum alloy is similar to 3003 alloy, having medium strength and good corrosion resistance. Aluminum Alloy 5005 is used as conductor, cooker, instrument panel, Shell and building decoration. The anodized film is brighter than that on 3003 alloy and is in harmony with the color of 6063 alloy.
According to different treatment methods, aluminum alloy coil can be divided into Mirror surface aluminum plate, Brushed aluminum plate, Anodized aluminum plate, PE coated aluminum plate, PVDF coated aluminum plate etc.
| Aluminium Material Grade |
| 1)1000series aluminium /Pure Aluminum/Pure Aluminium:1050,1060,1070,1080,1100,1350,etc |
| 2)2000series aluminium alloy/Hard Aluminum/Hard Aluminium/Aluminum-Copper Alloy/ Aluminium-Copper Alloy:2011,2014,2017,2024,etc |
| 3)3000series aluminium alloy/ Rust-Proof Aluminum/Rust-Proof Aluminium/ Aluminum-Manganese Alloy:3002,3003,3104,3204,3030,etc |
| 4)5000series aluminium alloy/ Rust-Proof Aluminum/Rust-Proof Aluminium /Aluminum-Magnesium Alloy:5005,5025,5052,5040,5054,5056,5083,5152,etc |
| 5)6000series aluminium alloy / Aluminum-Magnesium-Silicon Alloy /Aluminium-Magnesium-Silicon Alloy /:6101,6003,6061,6063,6020,6201,6262,6082,etc |
| 6)7000series aluminium alloy/ Aluminum-Zinc Alloy/ Aluminium-Zinc Alloy:7003,7005,7050,7075,etc |
| 7)8000series aluminium alloy:8011,etc |
Chemical Composition
| ALLOY | CHEMICAL COMPOSITION (%) | | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Zr | Other | Al | | 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | | | | 0.1 | | | 0.05 | 0.15 | rest | | 3004 | 0.3 | 0.7 | 0.25 | 1.0-1.5 | 0.8-1.3 | __ | __ | 0.25 | __ | __ | 0.05 | 0.15 | rest | | 3104 | 0.6 | 0.8 | 0.05-0.25 | 0.8-1.4 | 0.8-1.3 | __ | __ | 0.25 | 0.1 | __ | 0.05 | 0.15 | rest | | 3105 | 0.6 | 0.7 | 0.3 | 0.3-0.8 | 0.2-0.8 | 0.2 | __ | 0.4 | 0.1 | __ | 0.05 | 0.15 | rest | | 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | __ | 0.1 | __ | __ | 0.05 | 0.15 | rest | | 5A06 | ≤0.40 | 0.000～0.400 | ≤0.10 | 0.50～0.8 | 5.8～6.8 | __ | 0.0001～0.005 | ≤0.20 | 0.02～0.10 | __ | 0.05 | 0.1 | rest | | 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | __ | 0.25 | __ | __ | 0.05 | 0.15 | rest | | 5050 | 0.4 | 0.7 | 0.2 | 0.1 | 1.1-1.8 | 0.1 | __ | 0.25 | __ | __ | 0.05 | 0.15 | rest | | 5154 | 0.25 | 0.4 | 0.1 | 0.1 | 3.1-3.9 | 0.15-0.35 | | 0.25 | 0.2 | | 0.05 | 0.15 | rest | | 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | __ | 0.2 | 0.15 | __ | 0.05 | 0.15 | rest | | 5454 | 0.25 | 0.4 | 0.1 | 0.5-1.0 | 2.4-3.0 | 0.05-0.2 | | 0.25 | 0.2 | | 0.05 | 0.15 | rest | | 5182 | 0.2 | 0.35 | 0.15 | 0.2-0.5 | 4.0-5.0 | 0.1 | | 0.25 | 0.1 | | 0.05 | 0.15 | rest | | 5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | _ | 0.25 | 0.15 | __ | 0.05 | 0.15 | rest | | 5086 | 0.4 | 0.5 | 0.1 | 0.2-0.7 | 3.5-4.5 | 0.05-0.25 | | 0.25 | 0.15 | | 0.05 | 0.15 | rest | | 6060 | 0.3-0.6 | 0.1-0.3 | 0.1 | 0.1 | 0.35-0.6 | 0.05 | | 0.15 | 0.1 | | 0.05 | 0.15 | rest | | 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | __ | 0.25 | 0.15 | __ | 0.05 | 0.15 | rest | | 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45-0.9 | 0.1 | __ | 0.1 | 0.1 | __ | 0.05 | 0.15 | rest | | |
Mechanical properties:
| Alloy | Temper | Thickness(mm) | Tensile strength(Mpa) | Yeild strength(Mpa) | Elongation(%) |
| Min |
| 5005 | O H111 | ＞0.20 — 0. 50 | 100—145 | 35 | 15 |
| ＞0. 50〜1.50 | 19 |
| ＞1.50 — 3. 00 | 20 |
| >3, 00 — 6, 00 | 22 |
| >6.0-12.5 | 24 |
| >12.5-50 | |
| H12 | >0.20 — 0. 50 | 125-165 | 95 | 2 |
| ＞0. 50〜1.50 | 2 |
| >1.50 — 3. 00 | 4 |
| >3, 00 — 6, 00 | 5 |
| H22 H32 | >0.20 — 0.50 | 125 — 165 | 80 | 4 |
| >0. 50〜1. 50 | 5 |
| >1. 50 — 3.00 | 6 |
| >3.00 — 6.00 | 8 |
| H24 H34 | >0. 20 — 0.50 | 145 — 185 | 110 | 3 |
| >0.50—1. 50 | 4 |
| >1, 50—3, 00 | 5 |
| >3. 00 — 6. 00 | 6 |
| H26 H36 | >0.20 — 0. 50 | 165 — 205 | 135 | 2 |
| >0. 50—1.50 | 3 |
| >1.50 — 3.00 | 4 |
| >3.00 — 4.00 | 4 |
| H28 H38 | >0. 20 — 0.50 | 185 | 160 | 1 |
| >0.50 — 1.50 | 2 |
| >1.50 — 3.00 | 3 |
| H112 | >6, 00 —12. 50 | 115 | —— | — |
| >12. 50 — 40. 00 | 105 | — |
| >40.00 — 80. 00 | 100 | — |
Product Photo
Company Introduction
Chongqing Dongchong AluminumCo,.Ltd. is a manufacturer of Aluminium products with well-equipped,experienced work team.Our company is equipped with international advanced aluminum production lines. We also own press machine, double-sided milling, cutting machine, recoiler, grinding machine, quenching furnace, tension pre-stretching machine, annealing furnace, smelting furnace machine and so on. We mainly provide aluminum and its alloy sheets, plates, strips, circles, foils, embossed coils, colorful painted aluminum coils, sheet products, etc.With a wide range, good quality, reasonable prices and stylish designs, our products can meet most of all customer needs.Our company established in 2002 and have been in aluminium indurstry for more than 15 years.We have our own brand and customized services are available too.We are an ISO9001:2008 certified company and our QC staff members have ten years' experience in this area. To maintain a strict QC system, we not only utilize precision testing instruments but also continuously train our QA personnel regarding the latest testing principles.We have established long term business relationships with customers in many countries and areas in the world, including the USA, Canada, Brazil, India, Chile, Nigeria, Ghana, Italy, etc. We will continue providing high quality products and better services for our customers, and welcome you to visit our company and establish good business relationships with us.
| Equipment Production Parameters By Chongqing Dongchong Aluminum Co.,Ltd |
| 1650mm Slitting machine | Uncoil(MM) | Finished size(MM) | Slitting Width(MM) |
| ID | OD | Width | Thickness | ID | OD | Above 0.5mm≥ 20mm |
| Φ 400 | ≤ 1800 | ≤ 1600 | 0.5-4.5 | Φ 400 | ≤ 1700(normal) |
| Φ 500 | Φ500(normal) |
| Φ 600 |
| Aluminum foil Slitting machine | Uncoil(mm) | Finished size(MM) |
| ID | OD | Width | Thickness | ID | OD | Width |
| Φ 76 | ≤ 550 | ≤ 1200 | 0.08-0.12 | Φ76Φ76 | ≤ 550(normal) | |
| 1450mm Crosscutting machine | Uncoil(MM) | Finished size(MM) |
| ID | OD | Width | Thickness | ID | OD | Width |
| Φ 505 | ≤ 1780 | ≤ 600 | 0.1-1.5 | Φ150
Φ300
Φ400 Φ500 | ≤ 1700(normal) | 6-600 |
| Φ 605 |
| Annealling Furnace | Furnace Temperature | Furnace Size |
| ≤440°C | 3200*2000*2100 |
| Saw Cutting | Thickness(mm) | Width (mm) | Length (mm) |
| Size |
|
Product Tags:
|
|
Corrosion Resistance Anti Rust 5005 H34 Aluminum Sheet Images
|
